AX32 Guarantees Consistent Sound and Convenience for DPA Roadshow
DPA Microphones have been touring the world since the summer of 2017 and plan to continue in 2018. A permanent passenger on their microphone masterclass tour is an AX32 that acts as the centerpiece on the stages.
DPA’s GET CLOSER World Tour is a series of microphone masterclasses where audio experts from within the company team up with a wide variety of legendary sound engineers.
These engineers come from film as well as music production backgrounds, but common to all of them is that they have been working at the highest possible level for many years.
We’re talking about sound experts who have captured the audio for films like Alien: Covenant, Mad Max Fury Road, The Hitman’s Bodyguard and Valérian - just to name a few.
And on the music side, Sting’s sound engineer for both studio sessions and recording of live concerts often joins in to share his knowledge and experience with the participants.
So, when the DPA GET CLOSER World Tour hit Copenhagen in late November 2017, we didn’t want to miss out on a great opportunity to experience a full day with focus on audio quality, recording and creativity. Especially not when we were fortunate to have a representative on the stage in the form of an AX32…
Consistency is King
During the day, we got the chance to talk to DPA’s Bo Brinck, who is one of their audio experts and also acts as the host of the masterclasses, about why DPA chose AX32 and how it is being used in the touring setup.
The Copenhagen masterclass was the 11th stop on the DPA World Tour and while the locations around the world have been carefully selected, there are natural differences at play. For instance, the physical rooms – and therefore acoustics – are unique and the Front of House setups are different. Some may have DiGiCo, and others may have an Allen & Heath or an Avid Venue consoles.
All of these options are great, but they also bring a unique sound to the table, so it was very important to the DPA World Tour team to take full control of as much of the signal chain as possible to ensure a high level of sound consistency: “To me, consistency in the sound we capture during the sessions is absolutely paramount,” Bo Brinck says. "Basically, I need to be 100% sure that the sound we pass on from the stage is always the same and in a super high quality that does our microphones justice.
With AX32 in the middle, I know that they go directly to very clean preamps and the best analog-to-digital conversion possible before being recorded in Pro Tools. Then, we send back the signals to the AX32 for digital-to-analog conversion and simply pass on a stereo signal to FOH. This way, I have complete control over everything from the stage, and I know that I can trust the signal chain through and through. I am very happy with the solution.”
The DPA Word Tour technical setup
Convenience is Key
But there is also another dimension to the technical setup and infrastructure. A full, local band is always hired to take part in the sessions in order to conduct realistic examples that are created on the stage in the particular room.
In short, each of the musicians is asked to play a few bars that are recorded with a wide variety of microphones simultaneously, and afterwards, the audience gets to listen to each of the microphones played back. Then, the microphone positions are changed for comparison purposes, which may happen several times.
In other words, there are a lot of microphones on the stage. And even though DPA’s AX32 is loaded with 24 channels of microphones preamp and AD conversion, it is necessary to swap some of the microphones for instance between some of the morning sessions and the afternoon sessions.
In that context, Bo Brinck is also taking advantage of one of AX32 and the accompanying DADman software’s features:
"Another really great thing is that I can easily use more than 24 microphones. Not at the same time, though. For instance, we may have a morning sessions, using a lot of our d:screet™ microphones, but in an afternoon session, we may use d:dicate™, d:facto™ and d:vote™ microphones. And all of them may need a different amount of gain depending on their role in the recording setup.
But with the AX32 I have simply programmed the gain amount into presets in the DADman software, and then I can quickly and easily load the preset that matches the new workflow. Should a channel need a slight gain adjustment on the fly due to the room or a particularly loud or soft instrument, I can easily access the DADman software and give it a notch.”
The Future is Here
Finally, Bo Brinck also got the opportunity to take a step into a new territory: IP Audio. Obviously, having a comprehensive technical setup that also has to be portable and easy to set up over and over again in every corner of the world, using Audinate’s Dante AoIP protocol seemed like a good way to keep cables at a minimum on the stage.
Well, with that many microphones, you will get a lot of cables leading into the AX32, but getting the audio to and from the Mac with pro Tools just takes a single Ethernet cable:
"I am using an IP Audio Dante connection. It’s a first for me, but it works absolutely flawlessly. I like to keep cable runs short and clutter-less, so I simply have a single Ethernet cable between the AX32 and the Mac, running Pro Tools. On the Mac I use Audinate’s Dante Virtual Soundcard, which also works perfectly.
To sum up, what we do at our masterclasses is really to combine studio or broadcast recordings with a live venue setting. Having a studio-grade, yet portable, signal chain on the stages of very different live venues is a challenge, but I really feel that we have found a great and very flexible solution – one that supports a multitude of workflows and matches the quality of our microphones,” Bo Brinck concludes.
Well, we definitely had a great time at DPA’s masterclass, and got some really cool insights and fun anecdotes from some of the most inspiring audio engineers along the way. And of course, we were pleased to learn that AX32 is a great match for DPA’s ambitious world tour that has visited 11 locations in 3 continents so far. We take that as hard evidence that AX32 is not only a rock-solid, reliable solution when sitting in a permanent rack, but also as part of a worldwide touring rig!
At the time of writing, the next time AX32 is on the stage with DPA is in Berlin, Germany, January 17th 2018.
Please follow the below link to sign up, or find out when their world tour comes by a city near you.
NTP Technology | Nybrovej 99 | 2820 Gentofte | Denmark |
Phone (+45) 45 96 88 80 | Fax (+45) 44 53 11 70 | Email: firstname.lastname@example.org